P1135 - Injection timing servo Malfunction:
Detecting Condition
When the engine rpm is more than 600 and water temperature is higher than -5°C :
│Target value-Real value│> 5mm (for more than 5 seconds)
Limp Home
Set the TPS signal value to 0mm
Injection timing control → Open loop control
Possible Cause
- TPS sensor error
- Inferior timer piston
- Cooled high-viscosity fuel
- Wire short/open
D4BH Timing Control Valve Checking.jpg
D4BH Timing Position Sensor Checking.jpg
P1131 - Ijection Quantity Adjustment Malfunction:
D4BH GE-Actuator checking.jpg
D4BH GE-Actuator resistance.jpg
У вас нет доступа для просмотра вложений в этом сообщении.